The Process of Hardwood Refinishing

Hardwood floor refinishing and refacing is the process of removing old finish and repainting over existing finish. It is used by wood restoration contractors and home owners alike to bring their floors back to life. However, it can be quite an undertaking for the average homeowner.

 

There are very high levels of dirt in some of the older homes and this can lead to problems with moisture and allergens. Even when it comes to hardwood floors, the finish may have been built up over a long period of time and is now starting to fall away. And if there is too much of a pile-up of dirt and grime on a newly refinished floor, it can cause discoloration. Removing this type of finish can bring the appearance back to life.

When you want to give your floors a new look, the best idea is to put new carpet and, if you have hardwood furniture, to buy new legs and furnishings. But, if the initial effort to reface your floor has not worked, you may want to consider having it cleaned. The modern method of cleaning hardwood floors is through the use of a high-powered water jet.

The only problem with using a high-powered water jet on hardwood floors is that the water can actually chip or cut through the finish if it hits an extremely smooth surface. That is why this process is not used on older floors that have been stained or varnished. The floor itself will be damaged if the water is not carefully controlled.

When the hardwood floors are cleaned professionally, they should be cleaned prior to being refaced. Many people do not know how to properly clean hardwood floors and, therefore, the floors become discolored or become damaged. They will need to have a pressure washer or water jetted with special equipment applied.

There are many different types of water jets and different techniques that can be used for cleaning. The best technique is to get a good clean and then apply the water with a sprayer or hosing with a fine nozzle. Do not spray on the floor more than three times or else you will damage the finish.

When you clean your floors with a high-powered water jet, the wet floor surface needs to be covered with a non-skid backing material. Using an inexpensive adhesive backing will work just as well. By applying the finish and wiping off the excess, you will then be able to use the water jet in a thorough clean up and refinishing. Professional floor refinishing guys are trained to handle the different types of hardwood floors and know how to restore them for a great-looking floor.

Bathroom Remodeling Ideas – Turning a Single Tub Into a Shower Stall

If you have a sink in your bathroom and want to convert it to a shower stall, then converting a tub to a shower is probably the most popular design. The tub in this case may also be referred to as a spa bath or whirlpool bath.

If you are considering a conversion of your tub to a shower stall, the first step is to visit a real estate office or home improvement store that has a “bathroom remodeling” division. They can help you decide which style of tub to purchase, what kind of trim to use, how much bathroom remodeling work you will need and other general floor plan advice. You can also find information on bathroom remodeling ideas that will make the transformation from tub to shower a very easy task.

Once you know the type of tub that you would like to convert, you can start thinking about the amount of work that will be involved in converting it. Obviously, if you intend to remodel your entire bathroom, you will have to have a contractor come in and do the work. But if you only want to install a shower in one part of the room, such as a vanity area, it can often be done at a fraction of the cost of a full bathroom remodel.

Converting a tub to a shower stall is not difficult, but it does require some planning. It may also be time consuming because of the many details that you will have to work out. The first thing that you should decide is whether you want to have a sunken tub or not.

Once you know that the type of tub you are choosing will determine the size of the tub you can build a shower stall in, you should consider what sort of enclosure you want for the stall. You may want a tub that can be turned into a stand up shower (this would usually be a double-walled enclosure), or you may want a smaller stall with shower curtain to turn it into a bathtub. If you decide to have a sink in the stall, you may wish to consider going for a luxurious stainless steel tub, and add an elegant frame to support the sink inside. Or you may decide to just create a pedestal with sanded down counter top and a stylish linen towel holder to turn your bath into a master bath.

If you can afford it, a few more features such as a beautiful wall hung mirror, hand made towels draped with raffia can add to the luxury of your bathroom. But really, the most important piece of luxury that you can add to your bathroom is a beautiful whirlpool tub. You can purchase a whirlpool bath that converts into a bathtub in a fraction of the price of a full bathroom remodel.

These are just a few bathroom remodeling ideas that can help you turn a simple tub into a stunning master bath. You can enjoy a whirlpool bath or you can have a spa bath where you can wash away the stress and cares of the day.

Laminated Flooring: Is It Worth the Cost?

Laminated flooring, a.k.a. laminate flooring, is one of the best options when it comes to flooring decoration. It comes in many colors and finishes and is able to be used for bathrooms, kitchens, and even living rooms.

Most people would agree that these surfaces are worth their price. Why? Because of their ability to hold up to everyday wear and tear and the fact that they can look great with any type of decorating style. If you are thinking about installing new laminated flooring, then you are probably wondering how this type of flooring can be used to improve the appearance of your home.

The thing to remember about this type of flooring is that it is not only going to be the best option for your home, but also for your investment. What you need to understand is that this type of flooring is not something that you should rely on when you need to replace your flooring. Instead, you should be looking at it as an addition to your home rather than a replacement. It is important to know what your options are when it comes to choosing a color, and style, as well as the cost and durability of the material.

Bathroom renovation may be something that you have considered for a while. By going with laminated flooring, you can make the room appear larger. These surfaces offer a great option when it comes to bathroom renovation.

There are different floor types that you can choose from, but most of them are laminate. They are manufactured in very similar designs so you can choose between bathroom renovation and a replacement. You can still choose a color scheme that suits your bathroom, so it shouldn’t be too difficult to install. The key is to make sure that you select a flooring that has a lasting and natural look.

It is a good idea to consult with a professional before you start any kind of flooring renovation. This will ensure that you get a good idea of what the final product will look like. You can also ask them questions and see if they can give you an estimate for the renovation, visitcoloradospringstileandflooring.com i you need consultation and inquiries.

It is important to remember that you can have different choices when it comes to choosing laminate. You can choose between certain designs such as tile, solid, or patterned, or even from an array of colors. Some flooring types can even be made to fit into the outline of any room you have.

It is important to keep this in mind when you are considering installing new laminated flooring. Make sure that you compare the cost and design options between a replacement and a renovation. You can easily save money by installing new laminated flooring rather than having a more expensive renovation. Remember that you can do a lot with this type of flooring, so take the time to learn more about what you can do with it.